BMO210
Multi‐parameter patient monitor
- 12.1" color TFT LCD screen with multi channel waveforms display
- Easy connecting with central monitoring system 96 hours data storage
- Suitable for adult, pediatrics and neonates
- Monitors end-tidal C02 and inspired C02 accuracy at high respiration rates
- Gas monitoring with cutting edge water filter tube
- Super ability against electrosurgical interference. Neither in cutting nor in burning, ECG waveform and HR can be influenced, very short recovering time after defibrillation, especially suitable for use in emergency or operating room.
- Unique thoracic impedance & nasal tube double model respiration test method (when the patient can not lie quietly, only nasal tube respiration can detect the right respiration waveform and respiration rate).
- 12.1’’ color TFT LCD screen, High brightness, Wide viewing, 7 waveforms can be displayed on the same screen. lightness and volume are adjustable independently.
- Streamlined outline design with a sense of the times & foldable handle.
- Multi‐language interface selection.
- User‐friendly and man‐machine dialogue interface with pop‐up menus, dialogue boxes, rotary mouse and etc.
- Blood pressure measurement fast and accurately, with venipuncture function.
- Advanced digital technology, accurately measure SpO2 in low perfusion situation.
- Drug calculation, ST‐segment detection, pacemaker and arrhythmia analysis.
- WAN communication function to network with the central monitoring system and make long‐distance monitoring, diagnosis, maintenance and software upgrade possible.
- Suitable for adults, pediatrics, and neonates.
- Applications in bedside and delivery monitoring; Widely used in a patient room, emergency room, operation room, PACU, ICU, CCU, etc.
| Standard parameters: | 3/5‐Lead ECG, ECG, NIBP, BMV SpO2, HR/PR, 2‐RESP, 2‐TEMP, Rechargeable Battery |
| Optional configuration: | Built-in printer, BMV SpO2, Nellcor SpO2, Masimo SpO2, 2-IBP, ETCO2(mainstream or side), WLAN accessory, Wall Mount, Moving cart |
| ECG | |
| Number of Leads : | 3 or 5 leads Lead View |
| Lead output: | 3 wires/5 wires ECG cable |
| User Slectable: | I,II,III,aVR,aVL,aVF,V(5 Lead);I,II or III(3 lead) |
| Gain Slection: | x1/4,x1/2,x1 and x2 Frequency Response |
| Diagnostic: | 0.05 to 90HZ |
| Monitor: | 0.5 to 35 HZ |
| Surgery: | Surgery:1-15HZ |
| Calibration Signa : | 1 (mV p-p) |
| Accuracy : | ECG calibration: ± 1 mv Heart rate accuracy: ± 1% |
| ECG Signal Range: | ±8 m V ( Vp-p ) |
| Review | Available |
| NIBP (Non-invasive blood pressure) | |
| Technique : | Oscillometric during inflation Range |
| Measurement type: | Adult, pediatric, neonate |
| Measurement parameter: | Systolic, Diastolic, Mean |
| Adult: | 40-270mmHg |
| Pediatric: | 40-240mmHg |
| Neonate: | 10-150mmHg |
| Measurment cycle: | <40 sec,typical |
| Cycles(Selectable): | 2,3,5,10,15,30min 1,2,4hr |
| STAT model: | 5 minutes of continuous reading Max Allowable Cuff Presure |
| Adult: | 300 mmHg |
| Pediatric: | 240mmHg |
| Neonate: | 150 mmHg |
| Resolutions: | 1mmHg |
| Transducer Accurancy : | ±2mmHg or±2% of reading |
| SpO2 | |
| Display type: | Waveform, data |
| Measurement range: | 0~100% |
| Resolution: | 1 BPM |
| Pulse rate range: | 30~250bpm |
| Accuracy: | ±1bpm |
| CO2(option) | |
| Measurement range: | 0﹪ ～ 10.0﹪ ( Carbon dioxide inhalation and carbon dioxide exhalation) |
| Accuracy: |
±2mmHg(＜5﹪ Measured values） 10﹪（＞5﹪ Measured values） |
| Pulse Oxemetry | |
| Range: | 0 to 100% |
| Resolution: | 1% |
| Accuracy: | 70% to 99% range ±2% ,1% to 69%range ±5% |
| Bodymark: |
•Over 144 bodymark patterns for all application |
| Method: | Dual wavelength LED |
| Respiration Rate: | |
| Rate: | Adult: 0 ~ 120 rpm Neo/Ped 0 ~ 150 rpm |
| Resolution: | 1rpm |
| Accuracy: | ± 2 breath/min |
| Heart(Pulse) Rate | |
| Range: | Adult 15-300 bpm,Pediatric 15-350 bpm |
| Accurancy: | ±2bpm or ±3% whichever is greate |
| Trends | |
| Memory: | 96 hr at 30 second intervals for a NIBP reading every 5 mintues |
| Display : | trabular;graphical |
CONFIDENCE WITH EXPERT FACTORY SERVICE
BMV Medical Technical Services & Support offers convenient options to maximize uptime of critical equipment while controlling costs. You deserve the peace of mind that comes with high quality service and support. Service personnel at BMV Medical focus on the needs of the healthcare institutions, so that care providers can focus on the needs of the patients.
Depend on our dedicated product specialists to deliver practical, comprehensive knowledge.
2-year warranty for peace of mind and low total cost of ownership.
Designed in the Taiwan and manufactured in China to meet the high standards of quality control, technical support and customer service that you've come to expect.
The single-board architecture and field replaceable modules make service fast and easy.BMV’s Customer Success Network gives you a Single Point of Entry for custom access to the right people for any situation.
Service Agreements brochure (PDF)
More Products
MX300
Handheld visuallzation tool for primary healthcare, provide physicians with imaging capabilities at the point-of-care!
PT50C
Fully-featured color Doppler touch ultrasound system, comes equipped with a best-in-class combination of performance and affordability.
BPU60
Equipped with superior image quality, comprehensive functions, high cost effectiveness and mobility,for different body scans and clinic departments.
VS15
Modular patient monitor dedicates to provide comprehensive healthcare solutions from ambulances to in-hospital cares.
